Product Detail

Technical Detail
 

     Product All

Lay On Ceiling Panels

Lay On Metal Suspended Ceiling System is being applied with pannels placing on T24 and T15 visible carriers, with square view. All pannels can be dismantled without a tool and reaching to original ceiling and equipment is easy.
Lay On Metal Pannels:  Can be produced with any standard dimension, perforation and colour.

Lay - On Metal Suspended Ceiling And Accessories Unit m2 Analyse.

Product

600*600mm

300*300mm

300*600mm

600*1200mm

1.Lay on panel

1,00 m²

1,00 m²

1,00 m²

1,00 m²

2.Main Tee3600m

0,83 m

0,83 m

0,83 m

0,83 m

3.Cross Tee 1200 m

1,67 m

3,32 m

1,67 m

1,67 m

4.Cross Tee 600 m

0,83 m

-

2,50 m

-

5.Cross Tee 300 m

-

2,50 m

-

-

6.L/Z profile

0,50 m

0,70 m

0,70 m

0,50 m

7.Hanger Wire

0,70 m

0,70 m

0,70 m

0,70 m

8.Double Spring

0,70 m

0,70 m

0,70 m

0,70 m

9.Steel Anchor

0,70 m

0,70 m

0,70 m

0,70 m

This Analyse are prepared for requirements for 30*30 cm 33 m2
This Analyse are prepared for requirements for 60*60 cm 66 m2

Product Detail

Standards:
•  TS-EN-13964-04 • ISO 9001 • ISO 14001 • CE   •ISO 18001
Material: Pannels are made of corrosion resistant aluminium or hot dip galvanised steel that homogen, A1 Class Fire Resistant, with min. 70 microns of electrostatic  polyester powder coated. 
Perforation: Panels are available as flat (no perforation), full perforated, perforated with 5 or 10 cm borders.
Perforation hole diameters: Holes are 2,5 mm as standard and give %16 total perforation, any requested diameters are possible.
Aqoustic Performance: Alpha-w / NRC  0,70 with the aqoustic 0,2 mm thick fire proof fabric inside.
Finishing detail of pannel: Lay-on metal plate with special connection point.
Carrier System: Roll formed, corrosion resistant hot dip galvanised homogen, A1 Class Fire Resistant steel
Pannel Dimensions: 600x600mm, 300x300mm or any required dimension.
Maximum Curve. 
According to standard TSE-EN-13964 “Suspended Ceilings – Requirements and Test Methods”  for metal suspended ceiling pannels, maximum curve should be 0,05mm after 28 days under load.
Carrier Type: T24 or T15 carrier will be used for lay-on pannels. 

Material Colour.
Pannels: RAL 9016 White as Standard or any requested RAL colour.
Carriers: Special colours, RAL 9016 white as standard or any requested RAL colour.

Technical Detail