Lay In Ceiling Panels

Lay In Metal Suspended Ceiling Pannels have a dropped design of 8 mm. With the same design and colour of T24 carrier profiles, they are dropping 8 mm down from T bars and that gives a light shadowy look. With the Z perimeter profiles, resized panels can be hidden. So the ceiling has a shadowy lined esthetic look.
Lay In Metal Pannels:  Can be produced with several dimensions, perforation and colour.

Lay In Metal Suspended Ceiling And Accessories Unit m2 Analyse.

Product

600*600mm

300*300mm

300*600mm

600*1200mm

1.Lay In Panel

1,00 m²

1,00 m²

1,00 m²

1,00 m²

2.Main Tee3600m

0,83 m

0,83 m

0,83 m

0,83 m

3.Cross Tee 1200 m

1,67 m

3,32 m

1,67 m

1,67 m

4.Cross Tee 600 m

0,83 m

-

2,50 m

-

5.Cross Tee 300 m

-

2,50 m

-

-

6.L/Z profile

0,50 m

0,70 m

0,70 m

0,50 m

7.Hanger Wire

0,70 m

0,70 m

0,70 m

0,70 m

8.Double Spring

0,70 m

0,70 m

0,70 m

0,70 m

9.Steel Anchor

0,70 m

0,70 m

0,70 m

0,70 m

This Analyse are prepared for requirements for 30*30 cm 33 m2
This Analyse are prepared for requirements for 60*60 cm 66 m2

Product Detail

Standards:
•  TS-EN-13964-04 • ISO 9001 • ISO 14001 • CE  • ISO 18001
Material: Pannels are made of corrosion resistant aluminium or hot dip galvanised steel that homogen, A1 Class Fire Resistant, with min. 70 microns of electrostatic  polyester powder coated. 
Perforation: Panels are available as flat (no perforation), full perforated, perforated with 5 or 10 cm borders.
Perforation hole diameters: Holes are 2,5 mm as standard and give %16 total perforation, any requested diameters are possible.
Aqoustic Performance: Alpha-w / NRC  0,70 with the aqoustic 0,2 mm thick fire proof fabric inside.
Finishing detail of pannel: Lay in metal plate with straight corner.
Carrier System: Roll formed, corrosion resistant hot dip galvanised homogen, A1 Class Fire Resistant steel.
Pannel Dimensions: 600x600mm, 300x300mm or any required dimension.
Maximum Curve.
According to standard TSE-EN-13964 “Suspended Ceilings – Requirements and Test Methods”  for metal suspended ceiling pannels, maximum curve should be 0,05mm after 28 days under load.
Carrier Type: T24 or T15 carrier will be used for lay in pannels. 

Material Colour.
Pannels: RAL 9016 White as Standard or any requested RAL colour.
Carriers: Special colours, RAL 9016 white as standard or any requested RAL colour.

Technical Detail